Copyright © 2000-2008. All rights reserved.
Protected by the copyright laws of the United Kingdom, France and by international treaties.
Protected by the copyright laws of the United Kingdom, France and by international treaties.
DB2C Specification
Solar Charge Controller
For Dual Battery Banks
Solar Charge Controller
For Dual Battery Banks
Download DB2C Charge Controller Datasheet
Battery Voltage Range
6.5 to 17
Volts
Solar Current
9
Amps max
Battery types
Gel and liquid
Lead acid
Dimensions
110w85h35d
mm
Weight
220
g
Display
LCD
32 charactors
Display resolution
0.1
Volts and amps
Charge modes
Boost
For 2hrs or until battery reaches 14.4V. Boost mode recommences if battery falls below 12.4V, or if solar current falls to zero.
PWM
14.4V. Boost and PWM for 2hrs max
Float
13.8V
Other modes
No solar
Night-time or dark mode.
Overcurrent
Max current exceeded. Charge stops for 2hrs.
Error
Battery faulty
PWM frequency
30
Hz
Self consumption
6.5
mA
Energy Loss
at full current
at full current
< 4
Watts
Maximum solar voltage
35
Volts
Regulation type
Series
Operating temperature
-10 to +50
Deg Celsius
Storage temperature
-20 to +60
Deg Celsius
Humidity
5 to 95
%
Case Material
Recyclable plastic
Protection
IP55
Connection type
Screw terminal blocks
Wire type
2.5
mm multi-strand
Wire length, battery
3.5
meters, Max
Wire length, solar panel
8
meters, Max
Fixing
Wall mounted. Fixed with two screws
Specially designed for Mobile Homes, Yachts and Narrowboats.
Charges Engine and Leisure Batteries.
Essential battery overcharging protection.
Fully automatic operation.
No setting up routine.
Displays solar current and battery voltages.
High reliability.
Small size.
Rear cable entry for hidden wiring.
Charges Engine and Leisure Batteries.
Essential battery overcharging protection.
Fully automatic operation.
No setting up routine.
Displays solar current and battery voltages.
High reliability.
Small size.
Rear cable entry for hidden wiring.
Available in black or light grey
